LMR36015FSCQRNXRQ1

The LMR36015-Q1 regulator is an easy-to-use synchronous step-down DC/DC converter. The device features integrated high-side and low-side power MOSFETs, delivering up to 1.5A of output current over a wide input voltage range of 4.2V to 60V, with a tolerance of up to 66V. The LMR36015-Q1 employs a peak current mode control scheme to provide optimal efficiency and output voltage accuracy. Leveraging advanced high-speed circuitry, the LMR36015-Q1 achieves regulation from a 20V input to a 5V output at a fixed frequency of 2.1MHz. A precision enable pin supports direct connection to wide input voltages or precise control of device startup and shutdown, offering design flexibility. The power-good flag, with built-in filtering and delay, provides a true indication of system status, eliminating the need for external supervisors. The LMR36015-Q1 uses a HotRod package to achieve low EMI, higher efficiency, and a minimal package-to-die ratio. The device requires very few external components, and its pin layout enables simple PCB routing. The small solution size and feature set of the LMR36015-Q1 are designed to simplify implementation across a wide range of end equipment.

Applications

• ADAS camera module
• Body control module

Key features

• AEC-Q100 qualified for automotive applications: Temperature Grade 1: -40°C to +125°C, TA
• Designed for automotive applications
• Junction temperature range: -40°C to +150°C
• Protection features: thermal shutdown, input UVLO, cycle-by-cycle current limiting, and hiccup short-circuit protection
• 0.4V dropout voltage (typical) at 1.5A load
• ±1.5% reference voltage accuracy
• 3.3V fixed output voltage option available
• Suitable for scalable power supplies
• Pin-compatible with: LMR36006-Q1 (60V, 0.6A), LMR33620/30-Q1 (36V, 2A or 3A)
• 400kHz and 2.1MHz frequency options
• Reduced solution size and cost through integrated technology
• Small 2mm×3mm VQFN package (with wettable flanks)
• Minimal external components
• Low power dissipation across full load range
• 93% efficiency at 400kHz (12VIN, 5VOUT, 1A)
• Improved light-load efficiency in PFM mode
• Quiescent current as low as 26μA
• Optimized for ultra-low EMI
• CISPR25 Class 5 compliant
• Hotrod package minimizes switching node ringing
• Parallel input paths minimize parasitic inductance
• Spread spectrum reduces peak radiated emissions
• Create custom designs with LMR36015-Q1 using WEBENCH Power Designer