PHB2.0-2x7PWZDK

This specification applies to the production and inspection of standard series strip connectors (pin headers). The product technical requirements are as follows: materials and plating are specified in the attached table; plastic part surfaces shall be smooth and clean, free from burrs, bubbles, scorch marks, and deformation, with no pull damage, excess material, or insufficient material at gates; terminal surfaces shall be free from oxidation and plating defects. Temperature range: -25℃~85℃; rated voltage: 250V AC/DC; rated current: 3A AC/DC; contact resistance: ≤0.02Ω; insulation resistance: ≥1000MΩ; withstanding voltage: 800V AC/minute; applicable PCB thickness: 1.6mm. Operating conditions: ambient temperature -25℃~+85℃; applicable wire gauge AWG#28~#22; applicable PCB thickness 1.6mm. Product surfaces shall be free from defects, contamination, cracks, and mechanical damage harmful to the product; contacts shall be free from corrosion, plating oxidation, and peeling; dimensions shall conform to the attached drawings; identical specifications shall be interchangeable. Regarding packaging: the inner packaging for plastic parts is plastic bags; the inner packaging for terminals is reel tape packaging; a certificate of conformity shall be enclosed (or affixed), indicating product name, specification/model, quantity, and date of manufacture; the outer packaging is cartons with a packing list affixed, indicating product name, specification/model, quantity, and shipment date, with products secured against movement inside the carton. Transportation by any means is permitted, provided products are kept dry and protected from mechanical damage. Storage requirements: packaged connectors shall be stored in a warehouse with ambient temperature -10℃~+40℃, relative humidity ≤80%, and surrounding air free from acidic, alkaline, and other corrosive gases.