TPS57040QDGQRQ1

The TPS57040-Q1 device is a 42-V 0.5-A step-down regulator with an integrated high-side MOSFET. Current mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no load, input supply current to 116 μA. Using the enable pin, shutdown supply current is reduced to 1.5 μA, when the enable pin is low. Undervoltage lockout is internally set at 2.5 V, but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow start pin that can also be configured for sequencing/tracking. An open drain power-good signal indicates the output is within 92% to 109% of its nominal voltage. A wide switching frequency range allows efficiency and external component size to be optimized. Frequency fold back and thermal shutdown protects the part during an overload condition.

Applications

• 12-V Automotive Power Systems
• Automotive Body Electronics
• Passive Safety: Brake System & Airbags
• 12-V and 24-V Industrial Low Power Systems
• Aftermarket Auto Accessories: Video, GPS, Entertainment

Key features

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results
• Device Temperature Grade 1: -40°C to 125°C Ambient Operating Temperature Range
• Device HBM ESD Classification Level 2
• Device CDM ESD Classification Level C4B
• 3.5-V to 42-V Input Voltage Range
• 200 mΩ High-Side MOSFET
• High Efficiency at Light Loads with a Pulse Skipping Eco-mode™ Control Scheme
• 116 μA Operating Quiescent Current
• 1.5 μA Shutdown Current
• 100-kHz to 2.5-MHz Switching Frequency
• Synchronizes to External Clock
• Adjustable Slow Start/Sequencing
• Undervoltage and Overvoltage Power-good Output
• Adjustable Undervoltage Lockout Voltage and Hysteresis
• 0.8-V Internal Voltage Reference
• Supported by SwitcherPro™ Software Tool