TPS57160QDRCRQ1

The TPS57160-Q1 is a 60V, 1.5A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. Low-ripple pulse-skip mode reduces no-load output supply current to 116μA. Using the enable pin, shutdown supply current is reduced to 1.5μA. The undervoltage lockout is internally set at 2.5V but can be raised using the enable pin. The output voltage startup ramp is controlled by the slow-start pin, which can also be configured to control power sequencing or tracking. An open-drain power-good signal indicates that the output is within 92% to 109% of its nominal voltage. The wide switching frequency range enables optimization of both efficiency and external component size. Frequency foldback and thermal shutdown provide component protection under overload conditions. The TPS57160-Q1 is available in a 10-pin thermally enhanced MSOP PowerPAD™ (DGQ) or a 10-pin small-outline no-lead (SON) (DRC) package.

Applications

• 12V, 24V and 48V industrial and commercial low-power systems
• Automotive aftermarket accessories: video, GPS, entertainment

Key features

• Automotive-qualified
• 3.5V to 60V input voltage range
• 200mΩ high-side MOSFET
• High-efficiency Eco-mode™ control with pulse skipping at light load
• 116μA quiescent operating current
• 1.5μA shutdown current
• 100kHz to 2.5MHz switching frequency
• External clock synchronization
• Adjustable soft-start/sequencing
• Power Good output with undervoltage and overvoltage detection
• Adjustable UVLO voltage and hysteresis
• 0.8V internal voltage reference
• Supported by SwitcherPro™ software tool