BOYAMICRO

BY25Q128ESSIG(T)

128Mbit 2.7V~3.6V 120MHz SPI SOP-8-208mil Memory

SOP-8-208milRoHSActive

128MBIT SPI NOR FLASH

Manufacturer: BOYAMICRO
Manufacturer part #: BY25Q128ESSIG(T)
Store part #: C22471255
Package / case: SOP-8-208mil
Category: Memory
Packaging: Tube-packed

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

1,131 in stock

#C22471255

Stock & price checked 19 h ago

Quantity	Unit price	Pack price
1+	₹194.71	₹194.71
10+	₹163.27	₹1,632.70
30+	₹145.93	₹4,377.90
95+	₹126.19	₹11,988.05
475+	₹117.52	₹55,822.00
1,045+	₹113.62	₹1,18,732.90

Quantity (min 1)

1 × ₹194.71

₹194.71

excl. GST

₹229.76 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 7–10 working days
GST invoice with every order
Standard pack: 95 per tube

BY25Q128ESSIG(T)

₹194.71 for 1 + GST

Specifications

Operating Temperature: -40℃~+85℃
Features: Write enable latch;Power-on reset;Hardware write protection;Software write protection;Absolute write protection
Memory Size: 128Mbit
Voltage - Supply: 2.7V~3.6V
Program / Erase Cycles: 100,000 cycles
Clock Frequency: 120MHz
Data Retention - TDR (Year): 20 Years
Page Programming Time (Tpp): 700us
Standby Supply Current: 2uA
Interface: SPI

Packaging & compliance

RoHS: RoHS
Lifecycle: Active
Moisture sensitivity: MSL 3 (168 hours)
Packaging: Tube-packed
Standard pack: 95 / Tube
Sold per: Piece
Minimum order: 1
Unit weight: 0.254 g

Overview

The BY25Q128ES is 128M-bit Serial Peripheral Interface (SPI) Flash memory, and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (/WP), and I/O3 (/HOLD). The Dual I/O data is transferred with speed of 216Mbits/s and the Quad I/O & Quad output data is transferred with speed of 432Mbits/s. The device uses a single low voltage power supply, ranging from 2.7 Volt to 3.6 Volt. Additionally, the device supports JEDEC standard manufacturer and device ID and three 1024bytes Security Registers.

Key features

Serial Peripheral Interface - Standard SPI: SCLK, /CS, SI, SO, /WP, /HOLD - Dual SPI: SCLK, /CS, IO0, IO1, /WP, /HOLD - Quad SPI: SCLK, /CS, IO0, IO1, IO2, IO3
Normal Read (Serial): 100MHz clock rate
Fast Read (Serial): 120MHz clock rate with 30PF load
Dual I/O data transfer up to 240Mbits/S
Quad I/O data transfer up to 480Mbits/S
Allows XIP (execute in place) Operation: Continuous Read with 8/16/32/64-byte Wrap
Serial-input Page Program up to 256bytes
Block Erase (64/32 KB)
Sector Erase (4 KB)
Chip Erase
Erase Suspend and Resume
Page Program time: 0.7ms typical
Sector Erase time: 70ms typical
Block Erase time: 0.25/0.4s typical
Chip Erase time: 100s typical
Flexible Architecture - Sector of 4K-byte - Block of 32/64K-byte
Low Power Consumption - 10mA maximum active current - 2uA maximum power down current
3x1024-Byte Security Registers with OTP Locks
Discoverable Parameters (SFDP) register
Enable/Disable protection with WP Pin
Write protect all/portion of memory via software
Top or Bottom, Sector or Block selection
Single Supply Voltage - Full voltage range: 2.7~3.6V
Temperature Range - Commercial ( [0℃ to +70℃) - Industrial ( -40℃ to +85℃)
Cycling Endurance/Data Retention - Typical 100k Program-Erase cycles on any sector - Typical 20-year data retention