FM25F01C-SO-T-G

The FM25F01C is a 1M-BIT (128K-byte) Serial Flash memory, with advanced write protection mechanisms. The FM25F01C supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output as well as Dual I/O. The FM25F01C can be programmed 1 to 256 bytes at a time, using the Page Program instruction. It is designed to allow either single Sector/Block at a time or full chip erase operation. The FM25F01C can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block.

Key features

• 1Mbit of Flash memory
• 32 uniform sectors with 4K-byte each
• 2 uniform blocks with 64K-byte each
• 4 uniform blocks with 32K-byte each
• 256 bytes per programmable page
• Wide Operation Range: 2.3V~3.6V single voltage supply, Industrial temperature range
• Serial Interface:
• Standard SPI: CLK, CS#, DI, DO, WP#
• Dual SPI: CLK, CS#, DQ0, DQ1, WP#
• Continuous READ mode support
• High Performance:
• Max FAST_READ clock frequency: 100MHz
• Max READ clock frequency: 50MHz
• Typical page program time: 0.5ms
• Typical sector erase time: 60ms
• Typical block erase time: 250/400ms
• Typical chip erase time: 1s
• Low Power Consumption: Typical standby current: <1μA
• Flexible Architecture with 4KB sector:
• Uniform Sector Erase(4K-bytes)
• Uniform Block Erase(32K and 64K-bytes)
• Program 1 to 256 bytes per programmable page
• Security:
• Software and hardware write protection
• 64-Bit Unique ID for each device
• High Reliability:
• Endurance: 100,000 program/erase cycles
• Data retention: 20 years
• Green Package:
• 8-pin SOP (150mil)
• 8-pin TSSOP
• 8-pin USON (2*3mm, 0.55mm thickness)
• 8-pin USON (1.5*1.5mm, 0.45mm thickness)
• All Packages are RoHS Compliant and Halogenfree