MX25L3273FM2I-08GTR

MX25L3273F is a 32Mb serial Flash memory organized as 4,194,304 x 8 bits. In Quad I/O mode, the organization becomes 8,388,608 bits x 4; in Dual I/O mode, it becomes 16,777,216 bits x 2. The MX25L3273F features an SPI and software protocol that allow it to operate on a simple 3-wire bus.

Key features

• Multiple I/O interfaces — Single I/O, Dual I/O, and Quad I/O
• Auto erase and auto program algorithms
• Program Suspend/Resume and Erase Suspend/Resume
• Permanently fixed QE bit, QE = 1; 4 I/O mode enabled
• SPI support — Mode 0 and Mode 3
• Supply voltage: 2.65~3.6 V for read, erase, and program operations
• Latch-up immunity up to 100 mA, voltage range -1 V to Vcc +1V
• High performance: VCC = 2.65~3.6V
• Normal Read frequency: 50MHz
• Fast Read frequencies: FAST_READ, DREAD, QREAD at 133MHz (with 8 dummy cycles); 2READ at 104MHz (with 4 dummy cycles) or 133MHz (with 8 dummy cycles); 4READ at 104MHz (with 6 dummy cycles) or 133MHz (with 10 dummy cycles)
• Configurable dummy cycle count for 2READ and 4READ operations
• 8/16/32/64-byte wrap burst read mode
• Low power consumption
• Typical erase/program endurance: 100,000 cycles
• Data retention: 20 years
• Input data format: 1-byte command code
• Advanced security features: block lock protection (BP0–BP3 and T/B status bits define protected area range)
• Extra 4K-bit security OTP: with identifier, factory-locked identifiable and customer-lockable
• Status register function
• Software Reset command
• Electronic identification: JEDEC-compliant 1-byte manufacturer ID and 2-byte device ID; RES command for reading 1-byte device ID
• Serial Flash Discoverable Parameters (SFDP) mode support
• Hardware features: SCLK input, SI/SIO0, SO/SIO1, SIO2, SIO3 pins
• Package: 8-pin SOP
• All devices RoHS compliant and halogen-free