DRV8873HPWPR
HTSSOP-24-EP Motor Drivers, Controllers RoHS
H-Bridge Motor Driver
- Manufacturer
- TI
- Manufacturer part #
- DRV8873HPWPR
- Store part #
- C2150604
- Package / case
- HTSSOP-24-EP
- Category
- Motor Drivers, Controllers
- Packaging
- Tape & Reel (TR)
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement · policy
1,356 in stock
#C2150604
Stock & price checked 4 days ago
| Quantity | Unit price | Pack price |
|---|---|---|
| 1+ | ₹432.47 | ₹432.47 |
| 10+ | ₹383.61 | ₹3,836.10 |
| 30+ | ₹358.74 | ₹10,762.20 |
| 100+ | ₹325.39 | ₹32,539.00 |
| 500+ | ₹313.31 | ₹1,56,655.00 |
| 1,000+ | ₹308.26 | ₹3,08,260.00 |
1 × ₹432.47
₹432.47
excl. GST
₹510.31 incl. 18% GST
- Dispatch in 7–10 working days
- GST invoice with every order
- Standard pack: 2,000 per reel
DRV8873HPWPR
₹432.47 for 1 + GST
Specifications
- Features
- Interleaved conduction protection;Current sensing/regulation function;Soft switching
- Technology
- Yes
- Interface
- SPI
- Operating Temperature
- -40℃~+125℃
- Supply Current (Iq)
- 10uA
- Peak Current
- 10A
- RDS(on)
- 150mΩ
Packaging & compliance
- RoHS
- ROHS3 Compliant
- Lifecycle
- Active
- ECCN
- EAR99
- Packaging
- Tape & Reel (TR)
- Standard pack
- 2,000 / Reel
- Sold per
- Piece
- Minimum order
- 1
- Unit weight
- 0.33 g
Overview
The DRV8873 device is an integrated driver IC for driving a brushed DC motor in industrial applications. Two logic inputs control the H- bridge driver, which consists of four N- channel MOSFETs that drive motors bi- directionally with up to 10- A peak current. The device operates from a single power supply and supports a wide input supply range from 4.5 V to 38 V. A PH/EN or PWM interface allows simple interfacing to controller circuits. Alternatively, independent half- bridge control is available to drive two solenoid loads. A current mirror allows the controller to monitor the load current. This mirror approximates the current through the high- side FETs, and does not require a high- power resistor for sensing the current. A low- power sleep mode is provided to achieve very- low quiescent current draw by shutting down much of the internal circuitry. Internal protection functions are provided for undervoltage lockout, charge pump faults, overcurrent protection, short- circuit protection, open- load detection, and overtemperature. Fault conditions are indicated on an nFAULT pin and through the SPI registers.
Applications
- ePOS and Currency Counters
- ATMs (Automated Tester Machines)
- Multi-Function Printers
- Laser Beam Printers
- Factory Automation and Robotics
- Motorized Window Blinds
- Adjustable Desks and Beds
Key features
- H-Bridge Motor Driver
- Drives One DC Motor, One Winding of a Stepper Motor, or Solenoid Loads
- 4.5-V to 38-V Operating Voltage Range
- 10-A Peak Current Drive
- Low HS + LSRDS(DN)
- 150 mΩ at TJ = 25℃, 13.5 V
- 250 mΩ at TJ = 150℃, 13.5 V
- Current Mirror for Output Current Sensing
- Configurable Control Interface
- PH/EN
- PWM (IN1/IN2)
- Independent Half-Bridge Control
- Supports 1.8-V, 3.3-V, 5-V Logic Inputs
- SPI or Hardware Interface Options
- Low-Power Sleep Mode (10 μA)
- Small Package and Footprint
- 24 HTSSOP PowerPAD IC Package
- Protection Features
- VM Undervoltage Lockout (UVLO)
- Charge Pump Undervoltage (CPUV)
- Overcurrent Protection (OCP)
- Output short to battery and short to ground protection
- Open Load Detection
- Thermal Shutdown (TSD)
- Fault Condition Output (nFAULT / SPI)
Same category
