NSG4427
2 Channel SOIC-8
Dual-channel 2A ultra-high-speed power switch driver
- Manufacturer
- WXNSIC
- Manufacturer part #
- NSG4427
- Store part #
- C7421045
- Package / case
- SOIC-8
- Category
- Gate Drivers
- Packaging
- Tape & Reel (TR)
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement · policy
1,950 in stock
#C7421045
Stock & price checked 5 days ago
| Quantity | Unit price | Pack price |
|---|---|---|
| 5+ | ₹37.43 | ₹187.15 |
| 50+ | ₹29.60 | ₹1,480.00 |
| 150+ | ₹26.24 | ₹3,936.00 |
| 500+ | ₹22.05 | ₹11,025.00 |
| 2,500+ | ₹20.19 | ₹50,475.00 |
| 4,000+ | ₹19.06 | ₹76,240.00 |
5 × ₹37.43
₹187.15
excl. GST
₹220.84 incl. 18% GST
- Dispatch in 7–10 working days
- GST invoice with every order
- Standard pack: 4,000 per reel
NSG4427
₹187.15 for 5 + GST
Specifications
- Input Logic Level - Low
- 800mV
- Rise Time
- 30ns
- Low Level Delay Time
- 25ns
- Fall Time
- 30ns
- High Level Delay Time
- 25ns
- Current - Output High(IOH)
- 2A
- Load Type
- IGBT
- Quiescent Current
- 200uA
- Input Logic Level - High
- 2.4V
- Voltage - Supply
- 4.5V~25V
- Operating Temperature
- -40℃~+125℃
- Driven Configuration
- Low Side
- Current - Output Low(IOL)
- 2A
Packaging & compliance
- RoHS
- RoHS
- Lifecycle
- Active
- Packaging
- Tape & Reel (TR)
- Standard pack
- 4,000 / Reel
- Sold per
- Piece
- Minimum order
- 5 (multiples of 5)
- Unit weight
- 0.163 g
Overview
The NSG4427 is a driver for power switch series. It features matched rise and fall times when charging and discharging the gates of power switches. The NSG4427 exhibits high latch resistance under any conditions within its rated power and voltage range. When noise spikes of up to 5V (either polarity) appear on the ground pin, the NSG4427 will not be damaged. The NSG4427 can accept reverse currents of up to 500mA forced back into its outputs without damage or logic upset. All terminals are fully protected against ESD up to 2.0 kV. The NSG4427 is an ultra-high-speed, high-current power chip driver with matched rise and fall times when charging and discharging the gates of power switches. The NSG4427 exhibits high latch resistance under any conditions within its rated power and voltage range. When noise spikes of up to 5V (either polarity) appear on the ground pin, the NSG4427 will not be damaged. The NSG4427 can accept reverse currents of up to 500mA forced back into its outputs without damage or logic upset. The NSG4427 contains two independent signal input ports for receiving control signals from the host controller without mutual interference. These two ports are designed with high reliability — even when a reverse current of up to 500mA is forced back into the outputs, no damage or logic upset will occur. The signal input ports also feature the ability to directly handle voltages as low as -10V, ensuring safe operation of the device under heavy noise waveform conditions, thereby enhancing the stability of the chip. The NSG4427 output is non-inverting with respect to the input and can be used to drive either P-type or N-type MOSFETs. Each output port can source or sink peak currents of 2A. Its high-speed, high-current characteristics make it suitable for driving MOSFETs in high-frequency application designs.
Applications
- Switching power supplies, switch-mode converters
- Line drivers
- Pulse transformer drive
- Driving MOSFETs and IGBTs
- Motor control
- Pulse generators
- Power switches
- DC-DC converters
- Class-D switching amplifiers
Key features
- Latch protection: withstands 0.5A reverse current
- Input logic protection down to -10V
- Low output impedance
- Dual-channel driver integrated in single chip
- Output peak current: 2A
- Operating range: 4.5V~25V
- Maximum input voltage up to 5V
- High capacitive load drive capability: switching time < 25ns at 1nF load
- Matched rise/fall times
- Propagation delay: 40ns
- Wide temperature range: -40°C~125°C
- Turn-on/turn-off delay: Ton/Toff = 70ns/70ns
- RoHS compliant
- SOIC8
Same category
