OPA567AIRHGR

2A 1 500uV 1.2V/us 80dB 10pA 1.2MHz 3.4mA Rail-to-Rail Input, Rail-to-Rail Output VQFN-12-EP(5.1x5.1) Instrumentation, Op Amps, Buffer Amps RoHS

VQFN-12-EP(5.1x5.1)ROHS3 CompliantActive

Rail-to-Rail I/O, 2A POWER AMPLIFIER

Manufacturer: TI
Manufacturer part #: OPA567AIRHGR
Store part #: C2058524
Package / case: VQFN-12-EP(5.1x5.1)
Category: Instrumentation, Op Amps, Buffer Amps
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

984 in stock

#C2058524

Stock & price checked 5 days ago

Quantity	Unit price	Pack price
1+	₹3,278.70	₹3,278.70
10+	₹3,197.52	₹31,975.20
30+	₹3,145.71	₹94,371.30
100+	₹3,095.65	₹3,09,565.00

Quantity (min 1)

1 × ₹3,278.70

₹3,278.70

excl. GST

₹3,868.87 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 7–10 working days
GST invoice with every order
Standard pack: 2,500 per reel

OPA567AIRHGR

₹3,278.70 for 1 + GST

Specifications

Output Current: 2A
Number of Channels: 1
Vos - Input Offset Voltage: 500uV
Slew Rate: 1.2V/us
Input Offset Current(Ios): 1pA
Operating Temperature: -40℃~+85℃
Common Mode Rejection Ratio(CMRR): 80dB
Ib - Input Bias Current: 10pA
Input Offset Voltage Drift(Vos TC): 1.3uV/℃
Gain Bandwidth Product: 1.2MHz
Quiescent Current: 3.4mA
Features: Enable/shutdown function
Input Voltage Noise Density: 8nV/√Hz@1kHz
Rail to Rail: Rail-to-Rail Input, Rail-to-Rail Output
Single Supply: 2.7V~5.5V

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 2,500 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.103 g

Overview

The OPA567 is a low-cost, high-current, operational amplifier designed for driving a wide variety of loads while operating on low-voltage supplies. It operates from either single or dual supplies for design flexibility and has rail-to-rail swing on the input and output. Output swing is within 300mV of the supply rails, with output current of 2A. Smaller loads allow an output swing closer to the rails. The OPA567 is unity gain stable, easy to use, and free from the phase inversion problems found in some power amplifiers. High performance is maintained at voltage swings near the output rails. The OPA567 provides an accurate user-selected current limit set with an external resistor, or digitally adjusted via a Digital-to-Analog Converter (DAC). The output of the OPA567 can be independently disabled using the Enable pin. This feature saves power and protects the load. Two flags are provided. The current limit flag, IFLAG, warns of current limit conditions. TFLAG is a thermal flag that warns of thermal overstress. The TFLAG pin can be connected to the Enable pin to provide a thermal shutdown solution. The OPA567 is available in a tiny 5mm x 5mm Quad Flatpack No-lead (QFN) package and features an exposed thermal pad that enhances thermal and electrical characteristics. It is small and easy to heat sink. The OPA567 is specified for operation over the industrial temperature range, -40°C to +85°C.