PT2470

The PT2470 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines. Two logic inputs control the H bridge driver, which consists of four N-channel MOSFETs that can control motors bi-directionally with up to 3.6-A peak current. The inputs can be pulse-width modulated (PWM) to control motor speed, using a choice of current-decay modes. Setting both inputs low enters a low-power sleep mode. The PT2470 device features integrated current regulation, based on the analog input VREF and the voltage on the ISEN pin, which is proportional to motor current through an external sense resistor. The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage, especially for motor startup and stall conditions. The device is fully protected from faults and short circuits, including under voltage (UVLO), overcurrent (OCP), and over temperature (TSD). When the fault condition is removed, the device automatically resumes normal operation.

Applications

• Printers
• Appliances
• Industrial Equipment
• Other Mechatronic Applications

Key features

• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads
• Wide 9-V to 36-V Operating Voltage
• 500-mΩ Typical RDS(on) (HS + LS)
• 3.6-A Peak Current Drive
• PWM Control Interface
• Integrated Current Regulation
• Low-Power Sleep Mode
• Small Package and Footprint – 8-Pin HSOP With ThermalPAD
• Integrated Protection Features – VM Under voltage Lockout (UVLO) – Across the Load Overcurrent Protection (OCP) – Thermal Shutdown (TSD) – Automatic Fault Recovery