TLIN10285DRQ1

5.5V~28V Transceiver 100Kbps SOIC-8 Drivers, Receivers, Transceivers RoHS

SOIC-8ROHS3 CompliantActive

Automotive LIN 125 mA System Basis Chip (SBC)

Manufacturer: TI
Manufacturer part #: TLIN10285DRQ1
Store part #: C3235098
Package / case: SOIC-8
Category: Drivers, Receivers, Transceivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

2,670 in stock

#C3235098

Stock & price checked 6 days ago

Quantity	Unit price	Pack price
1+	₹136.81	₹136.81
10+	₹110.06	₹1,100.60
30+	₹96.58	₹2,897.40
100+	₹83.31	₹8,331.00
500+	₹75.48	₹37,740.00
1,000+	₹71.35	₹71,350.00

Quantity (min 1)

1 × ₹136.81

₹136.81

excl. GST

₹161.44 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 7–10 working days
GST invoice with every order
Standard pack: 2,500 per reel

TLIN10285DRQ1

₹136.81 for 1 + GST

Specifications

Voltage - Supply: 5.5V~28V
Type: Transceiver
number of channels: 1
Data Rate: 100Kbps
Operating Temperature: -40℃~+125℃
ESD Protect: ±8kV
Features: Local wake-up;Bus wake-up;Low-power mode;Bus fault protection;Thermal shutdown protection;Under-voltage detection;TXD timeout protection
Supply Current: 135mA
Quiescent Supply Current: 33uA

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 2,500 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.107 g

Overview

The TLIN1028-Q1 is a Local Interconnect Network (LIN) physical layer transceiver that complies with the LIN 2.2A ISO/DIS 17987–4 standard and features an integrated Low Dropout (LDO) regulator. This LIN System Basis Chip (SBC) reduces system complexity by providing a 3.3V or 5V voltage rail with a current of up to 70mA (D) or 125mA (DRB and DDA) for power microprocessors, sensors, or other devices. The TLIN1028-Q1 has an optimized current-limiting waveform shaping driver to reduce Electromagnetic Emission (EME). The TLIN1028-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal. The receiver converts the data stream into a logic-level signal, which is sent to the microprocessor through the open-drain RXD pin. The sleep mode enables ultra-low current consumption and allows wake-up via the LIN bus or the EN pin. The LIN bus has two states: the dominant state (voltage close to ground) and the recessive state (voltage close to the battery). In the dominant state, the LIN bus is pulled high by an internal pull-up resistor (45kΩ) and a series diode, so responder node applications do not require external pull-up components. According to the LIN specification, commander node applications require an external pull-up resistor (1kΩ) plus a series diode.

Applications

Body electronics and lighting
Hybrid, electric, and powertrain systems
Automotive infotainment systems and instrument clusters
Appliances

Key features

AEC-Q100 (Grade 1): Meets automotive application requirements, compliant with LIN physical layer specification ISO/DIS17987-4 and SAE J2602 recommended practices for LIN
Functional Safety documentation available to support functional safety system design
Wide operating range supporting 12V applications
±58V LIN bus fault protection
LDO output supporting 3.3V or 5V
Sleep mode: ultra-low current consumption, wake-up via LIN bus or EN pin
Glitch-free power-up and power-down operation
Protection features: ESD protection, VSUP undervoltage protection, TXD dominant timeout (DTO) protection, thermal shutdown, and system-level unpowered node or ground disconnection fault protection
VCC supply up to 125mA in DRB and DDA packages
Available in SOIC (8), HSOIC (8), and leadless VSON (8) packages with enhanced AOI capability