AMC1301QDWVRQ1

The AMC1301-Q1 device is an isolated precision amplifier. The output and input circuits of this amplifier are separated by an isolation layer with extremely strong anti-electromagnetic interference performance. According to the VDE V 0884-10 and UL1577 standards, this isolation barrier is certified to provide enhanced current isolation up to 7 kVPEAK. When used with an isolated power supply, this device can prevent noise currents on common-mode high-voltage lines from flowing into the local ground and interfering with or damaging sensitive circuits. The input of the AMC1301-Q1 device is optimized for direct connection to shunt resistors or other low-voltage signal sources. This device features excellent performance and supports precise current control, thereby reducing system-level power consumption (especially in motor control applications) and minimizing torque ripple. The integrated common-mode overvoltage and high-side power supply voltage loss detection features of this device (AMC1301-Q1) can simplify system-level design and diagnosis. The AMC1301-Q1 device is available in a wide-body 8-pin SOIC (DWV) package.

Applications

• Shunt-based current sensing or resistor divider-based voltage sensing input
• Traction inverter
• On-board charger (OBC)
• DC-DC converter
• Battery management system (BMS)

Key features

• Meets automotive application standards with AEC-Q100 qualification results: Temperature Grade: -40°C to 125°C; Human Body Model (HBM) ESD Classification Level 2; Charged Device Model (CDM) ESD Classification Level C6
• Low offset error and drift: ±200μV at 25°C, ±3μV/°C
• Fixed gain = 8.2
• Ultra-low gain error and drift: ±0.3% at 25°C, ±50ppm/°C
• System-level diagnostic features with safety-related certifications: 7000Vpeak reinforced isolation per DIN V VDE-V 0884-10 (VDE-V 0884-10):2006-12; 5000VRMS isolation for 1 minute per UL 1577; CAN/CSA No. 5A Component Acceptance Service Notice