NSG4426
4.5V~20V 2A 2A SOP-8 Gate Drivers
- Manufacturer
- NCE
- Manufacturer part #
- NSG4426
- Store part #
- C53436465
- Package / case
- SOP-8
- Category
- Gate Drivers
- Packaging
- Tape & Reel (TR)
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement · policy
2,500 in stock
#C53436465
Stock & price checked 6 days ago
| Quantity | Unit price | Pack price |
|---|---|---|
| 5+ | ₹39.58 | ₹197.90 |
| 50+ | ₹31.78 | ₹1,589.00 |
| 150+ | ₹28.43 | ₹4,264.50 |
| 500+ | ₹24.26 | ₹12,130.00 |
| 2,500+ | ₹22.41 | ₹56,025.00 |
| 4,000+ | ₹21.29 | ₹85,160.00 |
5 × ₹39.58
₹197.90
excl. GST
₹233.52 incl. 18% GST
- Dispatch in 7–10 working days
- GST invoice with every order
- Standard pack: 4,000 per reel
NSG4426
₹197.90 for 5 + GST
Specifications
- Input Logic Level - Low
- 800mV
- Low Level Delay Time
- 30ns
- High Level Delay Time
- 20ns
- Input Logic Level - High
- 2.4V
- Voltage - Supply
- 4.5V~20V
- Operating Temperature
- -40℃~+125℃
- Driven Configuration
- Low Side
- Current - Output Low(IOL)
- 2A
- Rise Time
- 30ns
- Fall Time
- 30ns
- Current - Output High(IOH)
- 2A
- Load Type
- MOSFET
Packaging & compliance
- RoHS
- RoHS
- Lifecycle
- Active
- Packaging
- Tape & Reel (TR)
- Standard pack
- 4,000 / Reel
- Sold per
- Piece
- Minimum order
- 5 (multiples of 5)
- Unit weight
- 0.309 g
Overview
NSG4426 is a power switch driver featuring matched rise and fall times when charging and discharging the gate of a power switch. The NSG4426 offers high latch-up immunity under any operating condition within its rated power and voltage range. The NSG4426 will not be damaged when noise spikes of up to 5V (either polarity) appear on the ground pin. The NSG4426 can accept up to 500mA of reverse current forced back into its output without damage or logic upset. All terminals are fully protected against ESD up to 2.0kV. The NSG4426 incorporates two independent signal input ports for receiving control signals from the host controller without cross-interference. Both ports are designed with high reliability — even with 500mA of reverse current forced back into the output, no damage or logic upset will occur. The signal input ports are also capable of directly handling voltages down to -10V, ensuring safe device operation under large noise waveforms and improving overall stability. The NSG4426 signal input ports have pull-up resistors to VCC; it is recommended to short these ports to VCC when not in use. The NSG4426 output is inverted relative to the input, making it suitable for driving either P-type or N-type MOSFETs. Each output port can source or sink peak currents of 2A, and its high-speed, high-current capability makes it well suited for driving MOSFETs in high-frequency applications.
Applications
- Switching power supplies, switching converters
- Line drivers
- Pulse transformer drive
- Driving MOSFETs and IGBTs
- Motor control
- Pulse generators
- Power switches
- DC-DC converters
- Class D switching amplifiers
Key features
- Latch-up protection: withstands 0.5A reverse current
- Input logic protection down to -10V
- Low output impedance
- Dual-channel driver in a single chip
- Peak output current: 2A
- Operating range: 4.5V~25V
- Maximum input voltage up to 25V
- High capacitive load drive capability
- Matched rise/fall times
- Wide temperature range: -40℃~125℃
- Turn-on/turn-off propagation delay -- Ton/Toff = 30ns/20ns
- RoHS compliant SOP8/DFN8
Alternatives
Similar parts — check the datasheet before substituting.
Same category
