XL1042T/3

The XL1042T/3 CAN transceiver complies with the ISO 11898- 2 (2016) standard for the high- speed CAN (Controller Area Network) physical layer. The device is specifically designed for CAN FD networks capable of data rates up to 5 Mbps (Megabits per second). The XL1042T/3 transceivers incorporate an auxiliary power input for I/O level adjustment, allowing for the setting of input pin thresholds and RXD output levels. It can be interfaced directly with microcontrollers with supply voltages from 2.7V to 5V. The XL1042T/3 boasts a standby mode for energy efficiency. Furthermore, it also offers a comprehensive range of protection features to enhance the durability of both the devices themselves and the network. These protection features contribute to the overall reliability and resilience of the CAN communication system.

Applications

• High-Speed CAN BUS communication system
• Automotive, such as Two-wheeled vehicle
• Industrial automation
• Energy storage

Key features

• Compliance with physical layer standards: ISO 11898-2(2016)- In the CAN FD fast phase at data rates up to 5 Mbit/s.
• Supports SAE J2962-2 and IEC 62228-3 (up to 500kbps) without the need for common-mode chokes
• VCC operates on a single supply voltage range of +4.5V to +5.5V
• I/O voltage and VCC are separated, and VIO range is +2.7V to +5.0V
• Undervoltage protection on VCC and VIO power supplies
• Low power standby mode (10uA Typical) with host and bus wake-up capability
• Transmitter dominant timeout (TXD DTO) for data rates as low as 10kbps
• Support thermal shutdown protection (TSD) function
• Ideal passive behavior when unpowered: high-impedance state on bus and logic pins (no load), enabling seamless power-up/power-down operation on the bus and RXD output
• CANH/CANL HBM (Human Body Model) rating: ±8kV, CDM (Charged Device Model) ±2kV
• CAN Bus fault protection: ±58V
• Receiver Common-Mode input voltage range: ±30V
• Operating junction Temperature range: -40°C to 125°C
• Available in SOP8 package